COPYRIGHT ©  YANTAI EMER GRANITE CO.,LTD   ALL RIGHT RESERVED 

  鲁ICP备16016703号-1 Powered by:www.300.cn

CASES

>
>
>
Pearl flower roadside stone construction requirements for stone

Pearl flower roadside stone construction requirements for stone

Release time:
18/08/23
[Abstract]:
The pearl flower curb stone refers to the boundary stone used at the edge of the road surface, so there is a certain requirement for the stone when the roadside construction is carried out. The follow

The pearl flower curb stone refers to the boundary stone used at the edge of the road surface, so there is a certain requirement for the stone when the roadside construction is carried out. The following small series introduces the requirements of the stone for the construction of the pearl flower side stone.

1, roadside stone quality standards:

Straightness: 10mm, adjacent block height difference: 3mm, slit width: ±3mm, side stone top elevation; ±10mm.

2, roadside stone material requirements:

The roadside stone material is machined by natural stone with uniform texture. The strength of the stone must be qualified, the color is uniform, the surface is free of cracks, the edges and corners are complete, the appearance is consistent, no obvious spots, color difference, no weathering phenomenon is allowed, loading and unloading When it is not allowed to fall, smash, bump, touch, so as not to cause damage.

3, roadside stone processing requirements:

The material is cut according to the uniform length, and the exposed surface must be machine cut and polished. The length tolerance is within ±20mm, and the allowable error of width, thickness and height is within ±2mm.

The above is the requirement of the stone flower side stone construction on the stone introduced by Xiaobian. I hope that you will be more comfortable when carrying out roadside construction! Of course, if you need to buy, please contact us in time, your satisfaction is the biggest for us. support.